Source: Internet Release Date: 2009/9/28
Mud valveUsed in water treatment plants as the discharge of sludge and wastewater in the pool.This valve has an angular structure with a nylon reinforced rubber diaphragm inside, which can be used for a long time.Mud valve. Mud valveThe main parts materials are: cast iron, stainless steel and nylon reinforced rubber.Simultaneously,Mud valve主要外形尺寸（法兰连接尺寸符合GB4216）有 H：125、145、155、175、200、225、275、325、375 DN：50、65、80、100、125、150、200、250、300Mud valveStructural characteristics Mud valveAlso known as cover valve, it is generally used to discharge sludge at the bottom of sedimentation tanks in urban water plants and sewage treatment plants.Mud valveThe applicable medium is raw sewage, the temperature of the medium should generally be less than 50 ℃, and its working water depth is less than 10 meters. Mud valveGenerally, it has the following structural characteristics: the valve cover has its own screw, which can be directly operated by the handle when the water depth is shallow; the valve plate is conical arch, with its own guide, and the opening operation force is small; the screw and sealing surface are made of tin bronze, which is corrosion-resistant and resistant. mill.It can be used with flashlight dual-purpose hoist for microcomputer control.Ordering instructions: 1. When ordering, (Mud valve) The user should indicate the depth of the sedimentation tank (the H value shown in the figure) to determine the length of the connecting shaft. 2.Mud valveThe operation method of is generally manual type, if the user needs to use electric type, please indicate when ordering. 3. The flange sizes shown in the table are common specifications. If users need special flange sizes, please indicate them when ordering.Mud valveAlso known as cover valve, it is generally used to discharge sludge at the bottom of sedimentation tanks in urban water plants and sewage treatment plants.Mud valveGenerally haveMud valveAnd pneumaticMud valveTwo kinds.The main feature of this valve is the use of a double-chamber diaphragm transmission mechanism instead of piston type, no movement and wear, and long life. Mud valveThe product is composed of a hydraulic cylinder and an angle cut-off valve. The power in the hydraulic cylinder drives the flap to rise and fall to open or close the valve body channel to achieve fluid communication.The piston seal of the hydraulic cylinder is an L-shaped leather cup, which has good sealing performance and is durable.The disc and the valve seat are softly sealed, with good sealing performance and no leakage. (Mud valve) It adopts electric two-position four-way reversing valve or manual two-position four-way reversing valve for centralized control, which is easy to operate. Mud valveIt is generally installed next to or in the water supply company or other types of pools, so that the sediment in the pool can be removed at any time.The valve consists of a valve body, a hydraulic cylinder, a piston, a valve stem, and a valve clack. The hydraulic cylinder is a liquid tool.The liquid is used as power, and the piston and valve stem are used as switches.It only takes one minute to open the valve plate. This valve must be equipped with a manual reversing valve or solenoid valve for remote controlMud valveswitch,Mud valveIt has the characteristics of strong sealing performance, flexible switch, convenient maintenance and long service life, and the service life can reach more than five years. Mud valveIt is an angle cut-off valve type valve with a hydraulic source as the actuator.Usually installed in rows on the outer side wall of the bottom of the sedimentation tank to remove the sediment and dirt at the bottom of the tank.The piston of the valve hydraulic cylinder is an L-shaped leather cup, which has good sealing performance and is durable. The valve sealing pair is also rubber sealed, and there is no leakage.It can also realize remote control through electric two-position four-way reversing solenoid valve.Easy to operate, safe and reliable.
