Worm get gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque output is required. Great for student based projects which includes robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The engine is snap fitted into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and other applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, also at very low voltages. We advise that you utilize stall-detection sensors, or just check out your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on small threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors arranged new standards for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration right now and a future proof answer. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the engine frame offering for unparalleled integration options.
Ever-Power gear motors comply with UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a corner turn, optional dual result, or perhaps an inability for the engine to be back again driven. The DC right angle gear motors are designed for constant and intermittent duty procedure. Our right angle equipment reducers were created with a number of mounting plate options, making them perfect for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a little package size. Worm Gear Motors are great for applications that require a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. Also, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision lower gears, voltages and sizes, EP Items has a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Dental care Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with among our Worm Gearheads. EP Products will continue to work with you to create and manufacture a Worm Gear Electric motor that will optimize the performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for sturdiness and a higher torque output. Due to the special mechanical framework of the worm drive the engine output shaft is definitely self locking and may not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their strength in applications where superior gear ratios are necessary. Our worm geared motors happen to be for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors could be quickly and efficiently adapted to fulfill your needs.
Worm gear systems impress with their great power density and small style. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP housing, we offer an extensive type of bolt-on elements to customize the product including torque arms, shaft addresses and output flanges. These can be easily field set up, but we may also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear models feature a soft, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product preferably suited for harsh and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides unique fixing possibilities and enable an easy assembling for the customer.
Other drive configurationscan be created by use of built-in components (e.g. torque arm and output flanges). The housings are made in light weight construction out of aluminium die cast. Engine attachment is realised in general by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm huge, 40mm high, a robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to fit, high torque output is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible Excessive torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, regarding motor without electric, the end result axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Get.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs output shaft) is not reversible when working with large reduction ratios, because of the higher friction involved between your worm and worm-wheel, when usually a single start (one spiral) worm can be used. This can often be a advantage when it’s desired to get rid of any likelihood of the result driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g