ep

March 19, 2020

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being coupled with a helical equipment stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you expect a drive answer to impress you with its high level of efficiency and efficiency? If so, we would recommend our high-quality helical-worm gearmotors EP to you. These can be implemented separately in the modular program. In this way, they offer you an enormous range of sizes, equipment ratios and motor sizes.
However, their greatest power is definitely their running smoothness and their extremely low noise development. A very important factor is certain – With the helical-worm gearmotors EP you are choosing a robust drive solution which you will hardly also hear.
The overall concept offers you a lot more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear systems. This is one way you save additional energy in the procedure of your systems and are able to noticeably decrease ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide selection of AC motors. In addition, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits offered by this mixture of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving money and time with this selection and task planning. This is because our modular system allows a multitude of combination options for gear systems and motors. You can consequently reduce operating costs, count on an extended service life and benefit from simplified maintenance that’s characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional strength and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding efficiency, these drives can be used in every commercial sector and customized to individual torque and swiftness requirements. The decrease ratios afforded by the helical-worm equipment stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel materials with particular lubricants, optimized form, this powerful motor achieves high levels of effectiveness and torque. The housing machined on all sides enables diverse mounting options. Dual chamber shaft seals are used as standard.
The low contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and higher torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Retains contaminants and water away.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to accept brakes, encoders or pressured cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new standards for reliability, performance and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration now and a truly future proof remedy. The EP gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in option positions rotated in 90º steps around the electric motor frame providing for unparalleled integration opportunities.
EP gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose proof,and can be used outside or in wet and dusty conditions without the usage of additional enclosures. Complete rated output is available at the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique mixture of optimized worm wheel material with unique lubricants and optimized form, this powerful geared electric motor achieves high degrees of efficiency and torque. The reduced contour design makes it ideal for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of condition of the artwork helical and worm gear combinations affords optimum overall performance fulfilling a wide variety of ratio requirements. The 800 BR is functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting result shafts
Dual and triple reduction ratios
Flanged or foot mounted
All systems adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternative for the standard duties anticipated of a right-position drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC engine are directly flange mounted, the pinion is upon the engine shaft. This integrated small design is an essential aspect for the high precision and the amazing stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision floor. The worm tires are made from special wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also part of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Functionality gearboxes in universal design. The housings are produced from high quality cast iron. The rugget walls and internal ribbing ensure extremely torsional stiff and noise dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with tough walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

To check out similar helical worm gear motor products we supply click.